YTA70 Temperature Transmitter

YTA70 Temperature Transmitter
Product Details

                                  YTA70 Temperature Transmitter

Features :

The YTA70 is a head mount type of temperature transmitter that accepts thermocouple, RTD, ohms
or DC milivolts input and converts it to a 4 to 20 mA DC signal for transmission. The YTA70 conforms to
the standard DIN form B head mounting. The YTA70 supports HART® communication protocol.
HART protocol revision is selectable from HART 5 or HART 7, and HART 7 features long tag number up
to 32 characters, enhanced burst mode and event notification, and command aggregation function.

 

Specifications :

 

Standard specifications :

Accuracy
See Table 1. on page 3.

Cold Junction Compensation Accuracy
(For T/C only)
±1°C (±1.8°F)

Ambient Temperature Effects
See Table 1. on page 3.

Power Supply Effects
±0.005% of FS per Volt

RFI Effects
Tested per EN 50 082-2, field intensity up to 10 V/m.

EMC Conformity
EN61326

Input Type, Span and Range
Selection from thermocouples (T/C), 2-, 3-, and 4-
wire RTDs, ohms and DC milivolts.
See Table 1 on page 3.

Maximum Zero offset
±50% of selected maximum value

Input Resistance (for thermocouples, mV)
10 MΩ, or 3 kΩ at power-off

Input Lead Wire Resistance (for RTD, ohm)
5 Ω per wire or lower
(up to 50 Ω per wire is configurable with reduced
measurement accuracy)

Sensor Burnout
High or Low

Output
Two wire 4 to 20 mA DC

Response Time
1 to 60 seconds programmable

Ambient Temperature Limits
(Option code may affects limit)
-40 to 85°C (-40 to 185°F)

Ambient humidity limits
0% to 95% RH (non-condensation)

Isolation
Input/output isolated to 1500 V AC.

 

Technical parameters :

 

 

 

Products show :

 

 

Why chose us :

 

 

Feedback