24 Series UE Pressure Switch

24 Series UE Pressure Switch
Product Details

                               24 Series UE pressure Switch

 

overview:

The cost-effective 24 Series Delta-Pro™ pressure, vacuum, and differential pressure switches offer a unique blend of compact size,excellent performance, and environmental protection. Available with brass or polysulfone pressure connections the Delta-Pro is ideal for applications involving hot or cool air, water, gas or oil. The precision snap-acting switch and sensitive diaphragms combine to provide a narrow deadband and repeatability of approximately ±1% of full scale range. A convenient, externally accessible adjustment screw is multi-turn to provide easy set point adjustability. The force-balanced design gives the Delta-Proexcellent vibration resistance.

Specifications :


Storage temperature         -20° to 180°F (-29° to 82°C)


ambient temperature         30° to 160°F (-1° to 71°C). Set point typically shifts less than ±0.6% of range for a
                                              50°F (28°C) ambient temperature change; consult factory for special ratings

 

max media temperature      200°F (93°C) at 100 psi working pressure

 

Shock                                  Set point repeats after 15G, 10 millisecond duration

 

Vibration                              Set point repeats after 2.5G, 5-500 Hz

 

EncloSure claSSification   Complies with enclosure type 4 requirements with optional water tight conduit
                                              connector. Reinforced polyester body, stainless steel cover with gasket.

 

Set point repeatability     Typically ± 1% of full scale range.

 

Switch output               One SPDT precision snap-acting micro-switch with mechanical contact life of 10
                                     million cycles. Actual life depends on electrical load and cycle frequency

 

Electrical rating           Rated to 5 A resistive and 5 A inductive (75% PF) at 125 VAC and 250 VAC, 1/4
                                     HP; 5 A resistive and 3 A inductive at 30 VDC and 0.5 A resistive and 0.25 inductive
                                    at 125 VDC. Gold flash over silver contacts for minimum loads of 5 mA at 6 VDC, 2
                                  mA at 12 VDC and 1 mA at 24 VDC

 

weight                      6.5 oz.

 

Electrical connection       7/8" hole for optional 1/2" NPT conduit connector. Terminal block with screw 
                                          terminals. Max wire size 16 AWG

 

Pressure connection        Models 013-014, 019-022: 1/4" NPT (female) brass; models 011-012, 015-018: 1/4" NPS
                                            (female) FDA compliant* Udel® polysulfone, non-tapered to minimize connection stress
                                           with 1/4" NPT (male) fittings - max torque is 2-ft.lbs.

 

Mounting & inStallation     Surface mount with two screws through clearance holes, or mount by pressure
                                             connections

 

Pro

Products show :

Why Chose us :

 

 

Feedback